Products catalog
In stock
As the name implies, general purpose blades are designed to effectively rip and crosscut so that you can continue working without changing saw blades.
General purpose blades combine a lower tooth count and larger gullets than crosscut blades so that they can rip effectively. And the alternate top...
Group: Circular saws
In stock
Cutterhead body in hard wearing aluminum, complete with tungsten carbide knives. Suitable for rounding over the edge of softwood, hardwood and man-made boards on a spindle moulder. Either raising or lowering the cutterhead on the machine selects different radii.
Group: Mills
In stock
Cutterhead body in hard wearing aluminum, complete with tungsten carbide knives. Suitable for producing various radii coves on the edges of softwood, hardwood and man-made boards on a spindle molder. Either raising or lowering the cutterhead on the machine selects different radii coves.
Group: Mills
In stock
ØD
B
Ød
Tool No.
1-7/8
1/4
1/2&3/4
SC672
2
1/4
1/2
SC612
2-1/2
1/4
1&1-1/4
SC674
2-5/8
1/4
1/2&3/4
*918
2-3/4
...
Group: Mills
In stock
10" TO 16" - 0° Hook - Modifed Triple Chip (TC) Grind
Saw Blade Application: For cutting double-sided plastic laminate, plexiglas and solid-surface materials such as Dupont®, Corian®, Wilsonart®, Gilbralter® & SSV®, Fountainhead, etc. Suitable for table saws & radial arm...
Group: Circular saws
In stock
11-3/4" Flat Top (FT) Grind - 15° Negative Hook
Saw Blade Application: Saw blades have 15° negative hook angle and specially designed C-1 (90% tungsten / 10% cobalt) carbide for demolition use. Also referred to as an emergency saw blade. Consult machine owner's manual and follow...
Group: Pila disk for longitudinal saw
In stock
When cutting acrylics such as Plexiglas®, polycarbonates sucn as Lexon® and other plastics, " chip-welding" --- a melting of the material --- is a concern. But not with the Amana Tool Non-Melt saw blades. Featuring a modified triple-chip grind and a 2° negative hook angle, the blade produces...
Group: Carbide cutting tool
In stock
As the name implies these specialty saw blades are specifically designed for cutting non-ferrous materials such as brass, copper, and aluminum. They feature a negative hook angle, triple-chip grind, and a thick plate.
Amana has saw blades specifically designed for both thick-walled and...
Group: Metalcutting tools
In stock
Carbide tipped with 2 pilots and plunge bit with two pilots and hardened boring point for thicker material, fast cutting. This enables the cutter to be guided by jigs or the inner frame from the top, middle or bottom of the cutter. A very useful cutter for motor body building, caravans and boat...
Group: Mills